Introduction
The Bose Soundsport Wireless are a great pair of headphones for working out, but they can be a little tricky to charge. In this article, we’ll walk you through the steps to get your headphones charged up and ready to go!
What You Will Need
Assuming you have a Bose Soundsport Wireless Headphones and a USB charging cable, you will need the following:
-A power outlet
-The Bose Soundsport Wireless Headphones
-The USB charging cable that came with the headphones
Charging Your Bose Soundsport Wireless Headphones
1. Plug the small end of the USB charging cable into the port on the right earbud.
2. Plug the other end of the USB cable into any power outlet.
3. The LED light on the right earbud will flash red, indicating that it is charging.
4. Once the LED light turns solid white, your headphones are fully charged.
5. You can unplug your headphones from the power outlet and USB cable.
Step One: Remove the Battery Cover
Remove the battery cover by gently pressing down on the top of the cover and sliding it off. You’ll see the lithium-ion polymer battery inside.
Step Two: Connect the Headphones to a USB Power Source
Connect the mini USB cable that came with your headphones to the USB power source. Then, connect the other end of the cable to the micro USB input on the bottom of the right earbud. The red charging indicator light on the earbud will turn on, letting you know that it’s charging.
Step Three: Check the Battery Level
Once your headphones are fully charged, the red charging indicator light will turn off. You can check the battery level by pressing and holding down the power button for two seconds. The LED indicator will show you how much charge is remaining—three white lights means it’s fully charged, two white lights means it has a moderate charge, and one white light means it has a low charge. If you see a blinking red light, that means your headphones are in power-saving mode and will need to be recharged soon.
Recommended:- How To Connect Your Bose Soundsport To PC Without Bluetooth
Step Two: Insert the Batteries
Assuming you have the right batteries, open up the battery compartment on the back of your headphones. You’ll see two metal contacts. Insert the batteries so that the positive end of each battery (marked with a + sign) touches the corresponding contact. If you need to, use a coin or something else to help you pry open the battery compartment.
Step Three: Replace the Battery Cover
Now that you have your new batteries, it’s time to put the battery cover back on. Make sure that the positive ( + ) and negative ( – ) signs on the batteries match up with the corresponding symbols on the inside of the battery cover. Once everything is lined up, snap the cover back into place. And that’s it! Your Bose Soundsport Wireless Headphones are now charged and ready to go.
Step Four: Connect the Micro-USB Cable
Now that you have your Bose Soundsport Wireless Headphones all set up, it’s time to charge them! To do this, simply connect the included micro-USB cable to the charging port on the bottom of the left earbud. Once connected, the LED indicator on the earbud will turn red, indicating that it is charging.
While your headphones are charging, you can still use them normally. However, you may notice a slight decrease in audio quality and volume when compared to when they are fully charged. This is normal and will not damage your headphones.
Once your headphones are fully charged, the LED indicator will turn green. You can now disconnect the micro-USB cable and enjoy your music without worry!
Conclusion
So, there you have it — a quick guide on how to charge Bose Soundsport wireless headphones. We hope you found this helpful and that you’ll be able to get the most out of your headphones. If you have any questions or suggestions, please feel free to leave us a comment below.